Home Pumps Electric Motors Bearing Isolators Mechanical Seals Matthew Davis Valves Contact Us
WEG
Low Voltage - IEC High Voltage - HGF
Marathon Electric
NEMA Frame Hazardous / Explosion Proof

Isoflow Series
End Suction Pumps

A single stage end suction centrifugal  pump esigned to International Standard ISO 2858 and is therefore dimensionally  interchangeable with all pumps conforming to this standard.  It also features Back Pull-Out of entire rotating element and easy impeller removal due to taper mounting

Flow up to 1000m3/h
Head up to 165 m


Download Brochure

Regent Pumps with Lloyd's Register Marine Certification available

Contact for more details

 

Mine Dewatering Package

Flow up to 290 L/s

Head up to 140 m

Isobloc Series
End Suction Pumps

A close coupled version of the acclaimed Regent Isoflow range.   Isobloc Pumps use standard “off–the–shelf “ TEFC foot and flanged electric motors and are articularly suited to confined spaces where long coupled units may not fit.   The pumps eliminate costly couplings and the alignment problems sometimes associated with long coupled models.In addition, users have the choice of a range of construction materials, pump discharge positions and large operating range.

Flow up to 1000m3/h
Head up to 165 m


Download Brochure

Dinflow Series
End Suction Pump

A single stage end suction centrifugal pump designed to International Standard EN733 (DIN 24255).  Back Pull-Out design so that a suitable spacer coupling is fitted to a direct coupled unit and the casing and motor can be remain in position while all other pump parts can be removed for simple and quick maintenance.  The volute casing is fitted with a replacemeable wear ring and is designed to provide a smooth flow into the double shrouded hydraulically balanced Impeller. 

Flow up to 1050 m3/h
Head up to 145 m


Download Brochure

Dinbloc Series 
End Suction Pump

A close coupled version of the acclaimed Regent Dinflow range.   All Regent Dinbloc Pumps use standard “off–the–shelf “ TEFC foot and flanged electric motors and are particularly suited to confined spaces where long coupled units may not fit.   The pumps eliminate costly couplings and the alignment problems  sometimes associated with long coupled models.

Flow up to 1050 m3/h
Head up to 145 m


Download Brochure

Linebloc Series – 
In Line Pump

An in-line close coupled single stage centrifugal motor pump.  These compact pumps are ideal when space is at a premium and you require a high flow at an economical operating cost.  Linebloc uses a standard off-the-shelf TEFC foot and flange electric motor.  If necessary, special types of electric motors can be fitted for specific applications like Exde motor, VSD’s configurations , etc..

Flow up to 1050 m3/h
Head up to 145 m


Download Brochure

RSV Series 
Vertical Multistage Inline Pump 

Stainless Steel construction coupled with IEC motor, Premium Efficiency IE3 available. With or without integrated Frequency Speed Drive supply as standard. Regent Pumps RSV-QX booster systems is a compact package with easy access to all service parts, all motors are fitted with integrated Frequency Speed Drive to ensure of smooth operation and manages pump performances to match a wide range of system conditions. Booster system is factory assembled and tested, preā€set according to customer requirement

Flow up to 120m3/h
Head up to 300 m


Download Brochure

Megaflow Series 
Horizontal (Vertical) Split Pump

The casing is axially split, thus allowing quick and easy maintenance. The top half of the casing can be removed, allowing access to the rotating element without disturbing pipe work or removing electric motor.

Flow up to 20,000 m3/h
Head up to 220 m


Download Brochure

RPCRP Series 
Corrosion Resistant Pumps

Non-metallic pumps developed to take maximum advantage from key features of a group of synthetic thermosetting resins.  The resins used for the construction of the pump have an excellent resistance to chemical attack, strength and hardness comparable with many metals, and a good resistance to abrasion from fluid borne solids.  The used of this pump provides a cost effective alternative for many process which would normally require the use of exotic metal alloy or plastic lined pumps.

Flow up to 1,200 m3/h
Head up to 145 m


Download Brochure
Regent Pumps for FiFi III & III 
Horizontal Mounting with side-side, bottom-top and side-top suction/discharge execution and end sucion. 
Flow up to 400 m3/h
Head up to 900 m


Download Brochure

RPVTP Series 
Vertical Turbine Pumps

Available in single or multistage, with a wide selection of hydraulic coverage and operating conditions. Fabricated or cast iron, discharge outlet above or below ground can be direct driven by Electric motor or by Engine via a right angle gear box.

Flow up to 4,600 m3/h
Head up to 320 m


Download Brochure

RPTS Series 
Multistage Pumps 

Designed for heavy duty applications, these pumps are segmental, horizontal, and equipped with closed impellers. The structure consists of double wearing ring, a labyrinth orifice sleeve, pressure relief pipe and angular contact ball bearing .

Flow up to 850 m3/h
Head up to 1050 m


Download Brochure

RPZ Series 
API610 Pumps

Heavy duty, single stage, overhung process pumps, built in accordance with the Last Edition of API 610 OH1 and OH2. The RPZ Series is ideally suited design to handle aggressive handling aggressive, organic and inorganic fluids in chemical and petrochemical processes, in refinery off-sites, in the paper and cellulose industries, food and luxury foods industries, sugar industry, in seawater desalination plants, absorption equipment in environmental engineering systems, power stations.

Flow up to 850 m3/h
Head up to 1050 m


Download Brochure

RPAH  Series 
Slurry Pumps 

Designed for handling of highly abrasive or corrosive high density slurries, these pumps are widely used in Metallurgical, Mining, Coal, Petroleum & Chemical, River & Channel dredging, and many other applications.

Flow up to 25,000 usgpm
Head up to 240 ft

Download Brochure

RPAP Series
Self-aspirating submersible aerators

Suitable for wastewater and water treatment in municipal and industrial plants. Main areas of application are mixing and equalisation tanks, activated sludge tanks, SBR-reactors and sludge storage tanks at a water depth between 2 to 8.5M  The aerator is free standing on the bottom of the basin and hence can be installed without emptying the basin.

O2 Transfer - 69 kg/hr
Aerator Diameter - 16 m

Download Brochure

RPSP-Q Series 
Submersible Sewage and Wastewater Pumps

Optimal for Sewage, Wastewater and Process Dewatering applications in various industries and municipalities.  Compact  heavy duty construction and reliable operations.

Flow up to 3,750 m3/h
Head up to 60 m


Download Brochure

RPSPT  Series Self Priming 
Trash and Sewage Pumps

These pumps are designed to handlie solids up to  75mm  in diameter and is suitable for many pumping applications from clean water to caustic fluids. Pump has an inspection hole for easy and quick maintenance and clean up. Stainless steel versions can also be used for pumping chemically aggressive liquids. The self priming characteristics of this range eliminate the need to use a foot valve.

Flow up to 1,250 m3/h
Head up to 60 m


Download Brochure